ARBOFLEX® Liquid Carrier Membrane 1m x 15m
Couldn't load pickup availability
Delivery:
IN STOCK. Next Day Delivery (if ordered before 13:00)
Key Features:
- Length: 15m
- Width: 1m
- Weight per roll: 28kg
- Application: Cold applied, Self-Adhesive
- Material: polyester-reinforced roofing base layer, with high-quality SBS (Styrene-Butadiene-Styrene) modified bitumen
- Use: Used as a a carrier membrane when used with Polyurethane liquid waterproofing
- Guarantee: BBA certified for life in excess of 25 years
Description:
ARBOFLEX® Liquid Carrier Membrane is a polyester-reinforced roofing base layer, saturated and coated with high-quality SBS (Styrene-Butadiene-Styrene) modified bitumen. The membrane is protected with fine grained sand on its upper layer, whilst the bottom layer features a self-adhesive compound coating, covered with removable film. It is specifically designed to act as a carrier membrane when used with ARBOFLEX®PU liquid waterproofing. The product is intended to be a part of a multi-layer built-up roofing system.
- Cold-applied, Self-adhesive Installation: Ensures ease of application and safety by eliminating the need for open flames.
- Flame-free Installation: Ideal for environments where traditional torch-on methods are not feasible.
- Easy-peel Removable Film: Simplifies the application process, saving time and reducing labor costs.
- Tough Polyester Reinforcement: Provides additional dimensional stability and mechanical strength.
- Good Resistance to Foot Marking: Maintains aesthetic and functional integrity under foot traffic.
- Excellent Low Temperature Flexibility: Performs reliably at temperatures as low as -15°C.
- Compatibility: Perfectly pairs with ARBOFLEX® PU liquid waterproofing systems.
- Compliance: Manufactured in accordance with EN 13707 + A2:2009 European Standards.
Downloads & Data Sheets:
Related Products
ARBOFLEX PU Liquid Waterproofing - Grey 20kg
ARBOFLEX PU Liquid Waterproofing - Grey 6kg
ARBOFLEX PU Accelerator - 2Ltr
ARBOFLEX PU UV Protecting Topcoat - 5kg
ARBOFLEX PU Thickener - 1Ltr
ARBOFLEX One Component PU Primer - 5kg
ARBOFLEX One Part Polyurethane Sealant - 300ml tube
ARBOFLEX Reinforcement Matting 225g - 1m x 20m
ARBOFLEX Reinforcement Matting 225g - 1m x 30m
ARBOFLEX Reinforcement Matting 225g - 1m x 60m
ARBOFLEX® Liquid Carrier Membrane 1m x 15m
GRP Flat Roof Breather Vent for Fibreglass Roofing Systems - 75mm
GRP Fibreglass Horizontal Parapet Drain Outlet
GRP Fibreglass Internal Drain Outlet
GRP Fibreglass Horizontal Through Wall / Parapet Outlet
GRP Fibreglass Floor Drain Outlet
Fibreglass Bandage for Upstands 18m - 75mm
Complete Roller - 75mm (3")
Complete Roller - 150mm (6")
Complete Roller - 250mm (9")
Desmopol Solvent Resistant Roller 225mm (pack of 1 x Arm & 5 x Heads)
Desmopol Solvent Resistant Roller (pack of 1 x Arm & 10 x Heads)
Desmopol Solvent Resistant Roller Sleaves (pack of 10 x Heads)
MG Latex Gloves for GRP Roofing - Large (pack of 50 pairs)
Resealable Mixing Bucket - 10ltr
ARBOFLEX Drip Edge Trim - 2.5m
ARBOFLEX Raised Edge Kurb Trim - 2.5m
ARBOFLEX Drip Corner - 200mm x 200mm
ARBOFLEX Non-Drip Kerb Edge Corner - 200mm x 200mm
ARBOFLEX Left Hand Corner - 200mm x 200mm
ARBOFLEX Right Hand Corner - 200mm x 200mm
A200 Universal GRP Fascia / Drip Trim - 3m
B230 Universal GRP Raised Edge Trim - 3m
D260 Universal GRP Wall Fillet Trim - 3m
AT195 Ext Universal GRP External Angle Trim - 3m
AT195 Int Universal GRP Internal Angle Trim - 3m
E280 Universal GRP Raised Ridge Roll Expansion Trim - 3m
C1 Universal GRP External Corner
C100 Universal GRP Simulated Lead Flashing Trim - 3m
C3 (Ext) Universal GRP Wall Fillet External Corner
C3 (Int) Universal GRP Wall Fillet Internal Corner
F300 Universal GRP Flat Trim - 300mm x 10m
Delivery:
IN STOCK. Next Day Delivery (if ordered before 13:00)
Key Features:
- Length: 15m
- Width: 1m
- Weight per roll: 28kg
- Application: Cold applied, Self-Adhesive
- Material: polyester-reinforced roofing base layer, with high-quality SBS (Styrene-Butadiene-Styrene) modified bitumen
- Use: Used as a a carrier membrane when used with Polyurethane liquid waterproofing
- Guarantee: BBA certified for life in excess of 25 years
Description:
ARBOFLEX® Liquid Carrier Membrane is a polyester-reinforced roofing base layer, saturated and coated with high-quality SBS (Styrene-Butadiene-Styrene) modified bitumen. The membrane is protected with fine grained sand on its upper layer, whilst the bottom layer features a self-adhesive compound coating, covered with removable film. It is specifically designed to act as a carrier membrane when used with ARBOFLEX®PU liquid waterproofing. The product is intended to be a part of a multi-layer built-up roofing system.
- Cold-applied, Self-adhesive Installation: Ensures ease of application and safety by eliminating the need for open flames.
- Flame-free Installation: Ideal for environments where traditional torch-on methods are not feasible.
- Easy-peel Removable Film: Simplifies the application process, saving time and reducing labor costs.
- Tough Polyester Reinforcement: Provides additional dimensional stability and mechanical strength.
- Good Resistance to Foot Marking: Maintains aesthetic and functional integrity under foot traffic.
- Excellent Low Temperature Flexibility: Performs reliably at temperatures as low as -15°C.
- Compatibility: Perfectly pairs with ARBOFLEX® PU liquid waterproofing systems.
- Compliance: Manufactured in accordance with EN 13707 + A2:2009 European Standards.
Downloads & Data Sheets:
Be the first to know about our latest offers, product deals & exclusive discounts!
- Choosing a selection results in a full page refresh.
Your cart
Subtotal