ClassicLiquid® Incline Additive 1kg

Classic Bond

  • £10.70 (inc VAT) £8.92 (ex VAT)

Delivery:

NEXT DAY Delivery (if ordered before 14:00)

Description:

ClassicLiquid 1kg Incline is a unique additive for the Waterproof Top Coat, developed for use on severley inclined, uneven or completely vertical substrates. The Additive is mixed into the ClassicLiquid Top Coat to improve the products slump resistance. 

The product is available in 1Kg plastic sausages that allows for easy addition into Waterproof Top Coat.

(To be mixed into the liquid at 10-30% ratio by weight dependant on incline angle)

Application:

Open the can of ClassicLiquid Waterproof Coating and mix thoroughly before adding the ClassicLiquid Thickening Additive.

Open the sausage of Thickening Additive and empty desired amount by hand into the pail (left over material can be sealed and stored for later use). Addition of Thickening Additive depends on specific project requirements, but the recommended amounts is 10-30% by weight. Mix the Thickening Additive gradually into the Waterproof Coating using a low speed mixer, being careful not to introduce air into the mixture, until the required thickness is achieved. Apply the thoroughly mixed material to the previously primed substrate as described in the technical data sheet.

Downloads & Data Sheets:

Product Data Sheet

NEXT DAY Delivery (if ordered before 14:00)

ClassicLiquid 1kg Incline is a unique additive for the Waterproof Top Coat, developed for use on severley inclined, uneven or completely vertical substrates. The Additive is mixed into the ClassicLiquid Top Coat to improve the products slump resistance. 

The product is available in 1Kg plastic sausages that allows for easy addition into Waterproof Top Coat.

(To be mixed into the liquid at 10-30% ratio by weight dependant on incline angle)

Open the can of ClassicLiquid Waterproof Coating and mix thoroughly before adding the ClassicLiquid Thickening Additive.

Open the sausage of Thickening Additive and empty desired amount by hand into the pail (left over material can be sealed and stored for later use). Addition of Thickening Additive depends on specific project requirements, but the recommended amounts is 10-30% by weight. Mix the Thickening Additive gradually into the Waterproof Coating using a low speed mixer, being careful not to introduce air into the mixture, until the required thickness is achieved. Apply the thoroughly mixed material to the previously primed substrate as described in the technical data sheet.


Related products