ClassicLiquid® Primer 4kg

Classic Bond

  • £55.00 (inc VAT) £45.83 (ex VAT)

Delivery:

NEXT DAY Delivery (if ordered before 14:00)

Description:

The ClassicLiquid system is a rapid curing polyurethane liquid membrane designed for overlaying existing roofing systems to create a durable and seamless waterproof layer. 

This 4 Litre ClassicLiquid Primer can be applied to many different substrates both porous and non porous and must be used prior to the use of ClassicLiquid Top Coats & Detailer.

Coverage rates will vary based on the existing roof porousity between 0.1 litres to 0.3 litres per square metre. Typically a semiporous surface will require 0.2 Litres / sqm meaning that this 4 litre tin will cover approximatey 20 square metres.

Application:
  • It is essential that the intended substrate is thoroughly cleaned with a high pressure washer, on smaller areas a stiff broom and soapy water and rinse will suffice. Remove all oil, grease and wax contaminants, cement laitance and loose particles.

  • Make good all cracks and blisters, fill surface irregularities with a suitable product. Allow to fully dry. Apply ClassicLiquid Primer at a sufficient coverage rate to seal the surface. Primer coverage rates will vary dependant on surface porosity Allow primer coat to fully dry. (approx. 2 hours but is dependent on ambient air temperature and humidity)

Recommended overlaying: 
  • Asphalt & bitumen roofs
  • GRP roofing systems
  • OSB3 T&G structural roof decks
  • Metal and fibre roof decks
  • Gypsum & cement Boards
  • Concrete Roofs
Downloads & Data Sheets:

Product Data Sheet

Product Brochure

NEXT DAY Delivery (if ordered before 14:00)

The ClassicLiquid system is a rapid curing polyurethane liquid membrane designed for overlaying existing roofing systems to create a durable and seamless waterproof layer. 

This 4 Litre ClassicLiquid Primer can be applied to many different substrates both porous and non porous and must be used prior to the use of ClassicLiquid Top Coats & Detailer.

Coverage rates will vary based on the existing roof porousity between 0.1 litres to 0.3 litres per square metre. Typically a semiporous surface will require 0.2 Litres / sqm meaning that this 4 litre tin will cover approximatey 20 square metres.

  • It is essential that the intended substrate is thoroughly cleaned with a high pressure washer, on smaller areas a stiff broom and soapy water and rinse will suffice. Remove all oil, grease and wax contaminants, cement laitance and loose particles.

  • Make good all cracks and blisters, fill surface irregularities with a suitable product. Allow to fully dry. Apply ClassicLiquid Primer at a sufficient coverage rate to seal the surface. Primer coverage rates will vary dependant on surface porosity Allow primer coat to fully dry. (approx. 2 hours but is dependent on ambient air temperature and humidity)


Related products