DuoPly™ Water Based Deck Adhesive
Couldn't load pickup availability
Delivery:
NEXT DAY Delivery (if ordered before 14:00)
Key Features:
- Size: 5Ltr & 15Ltr
- Coverage: 5.0 Litres (Coverage 15 to 20 sqm)
- Coverage: 15 Litres (Coverage 50 to 60 sqm)
- Use: Water Based Deck Adhesive for adhering DuoPly Fleece Reinforced Membrane to a timber deck.
Description:
This high strength low odour water based acrylic adhesive is specifically designed for use with DuoPly Fleece Reinforced EPDM roofing membrane to a range of deck surfaces. This product is designed to be applied with a medium roller direct to the timber flat roof surface.
Duoply WBA will bond Duoply Fleece Reinforced EPDM membrane to a range of conventional timber roof surfaces e.g. plywood, OSB3. All boards should be resistant to moisture but not sealed with adhesive repellent waxes or other nonabsorbent systems. Certain roof surfaces may not be suitable for use with this adhesive, for example, non-porous such as metal or existing GRP, for these surfaces DuoPly Contact Bonding Adhesive may be a more suitable alternative.
Downloads & Data Sheets:
Related Products
ClassicBond® SPB Spray Gun for Contact Bonding Adhesive (including spray tip)
Plastisol Metal Wall Trim for ClassicBond® Rubber Roofing - 3 mtr
Plastisol Metal Edge Trim for ClassicBond® Rubber Roofing - 3 mtr
ClassicBond® Horizontal Rain Outlet 100mm Complete Installation Kit
Delivery:
NEXT DAY Delivery (if ordered before 14:00)
Key Features:
- Size: 5Ltr & 15Ltr
- Coverage: 5.0 Litres (Coverage 15 to 20 sqm)
- Coverage: 15 Litres (Coverage 50 to 60 sqm)
- Use: Water Based Deck Adhesive for adhering DuoPly Fleece Reinforced Membrane to a timber deck.
Description:
This high strength low odour water based acrylic adhesive is specifically designed for use with DuoPly Fleece Reinforced EPDM roofing membrane to a range of deck surfaces. This product is designed to be applied with a medium roller direct to the timber flat roof surface.
Duoply WBA will bond Duoply Fleece Reinforced EPDM membrane to a range of conventional timber roof surfaces e.g. plywood, OSB3. All boards should be resistant to moisture but not sealed with adhesive repellent waxes or other nonabsorbent systems. Certain roof surfaces may not be suitable for use with this adhesive, for example, non-porous such as metal or existing GRP, for these surfaces DuoPly Contact Bonding Adhesive may be a more suitable alternative.
Downloads & Data Sheets:
- Choosing a selection results in a full page refresh.