ClassicBond® Seam Tape - 75mm
IN STOCK. NEXT DAY Delivery (if ordered before 14:00)
Sold per linear metre - Please enter quantity required in linear meters (for example, to order a 4 meter length enter 4 in the quantity field).
3 Inch EPDM seam tape is used to join two pieces of EPDM membrane when it is not practical to complete the roof in one piece. e.g. "L" shaped Roof
Ensure your two pieces of EPDM membrane that you wish to join are overlapping by 75 mm (3"). Fold back the top layer and apply Classicbond rubber primer to both surfaces. Wait until the primer is dry to the touch and then, leaving the backing film on the splice tape starting at one end stick the tape down onto the bottom EPDM membrane.
Use your hand to smooth down the splice tape ensuring there are no creases. allow the top membrane to fold back into position and then peal away the backing film pulling at a 45 degree angle while smoothing the top membrane over the seam tape with your hand. Use Seam Roller to apply pressure.
Downloads and Data Sheets: