Cladco 90° Verge Flashing Backer Plate for Standing Seam - 3m
Couldn't load pickup availability
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3m
- Dimensions: 90mm x 60mm x 23mm
- External Finish: GreenCoat® Pural BT
- Internal Finish: Light Grey Polyester
- Material: Pre-Coated Steel
- Gauge thickness: 0.7mm
- Fire Rating: A1 fire rated to BS EN 13501
- Use: Secure and close off the edges of your Stand Seam Roof
Description:
Cladco 90° Verge Flashing Backer Plates are designed to be used with Cladco 3m Verge Flashings to secure and close off the edges of your Stand Seam Roof. Backer Plates ensure a water-tight and aesthetically appealing finish to your building.
Cladco Verge Flashing Backer Plates are installed prior to your Standing Seam Roofing Sheets and Verge Flashings. Our Backer Plates, combined with Verge Flashings, create a seal for the ends of your roof to protect and tidy up the exterior of your building.
Our Backer Plates for Verge Flashings have an internal angle of 90° and are 3 metres long. Featuring a coating of GreenCoat® Pural BT provides a weather, corrosion and scratch resistant finish, in Slate Grey.
Our Flashings and Standing Seam Sheets are made of galvanised steel that is A1 fire rated to BS EN 13501.
Verge Flashings can be bought separately or as part of our Verge Flashing and Backer Plate Kits.
Downloads & Data Sheets:
Slate Grey
Related Products
Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (no Ribs)
Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs)
Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet without Eaves (no Ribs)
Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet without Eaves (with Ribs)
Cladco 130° Ridge Flashing for Standing Seam - 3m x 185mm x 185mm
Cladco 130° Ridge Flashing and Z-Bar Kit for Standing Seam - 3m x 185mm x 185mm
Cladco 90° Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Corner Barge Flashing and Z Bar Kit for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Internal Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Verge Flashing and Backer Plate Kit for Standing Seam - 3m
Cladco 90° Internal Corner Barge Flashing and Z Bar Kit for Standing Seam - 3m x 120mm x 120mm
Cladco 90° Verge Flashing Backer Plate for Standing Seam - 3m
Cladco 75° Mono Ridge Flashing and Backer Plate Kit for Standing Seam - 3m
Cladco 75° Mono Ridge Flashing Backer Plate for Standing Seam - 3m
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3m
- Dimensions: 90mm x 60mm x 23mm
- External Finish: GreenCoat® Pural BT
- Internal Finish: Light Grey Polyester
- Material: Pre-Coated Steel
- Gauge thickness: 0.7mm
- Fire Rating: A1 fire rated to BS EN 13501
- Use: Secure and close off the edges of your Stand Seam Roof
Description:
Cladco 90° Verge Flashing Backer Plates are designed to be used with Cladco 3m Verge Flashings to secure and close off the edges of your Stand Seam Roof. Backer Plates ensure a water-tight and aesthetically appealing finish to your building.
Cladco Verge Flashing Backer Plates are installed prior to your Standing Seam Roofing Sheets and Verge Flashings. Our Backer Plates, combined with Verge Flashings, create a seal for the ends of your roof to protect and tidy up the exterior of your building.
Our Backer Plates for Verge Flashings have an internal angle of 90° and are 3 metres long. Featuring a coating of GreenCoat® Pural BT provides a weather, corrosion and scratch resistant finish, in Slate Grey.
Our Flashings and Standing Seam Sheets are made of galvanised steel that is A1 fire rated to BS EN 13501.
Verge Flashings can be bought separately or as part of our Verge Flashing and Backer Plate Kits.
Downloads & Data Sheets:
- Choosing a selection results in a full page refresh.