1. Home
  3. Cladco 90° Verge Flashing Backer Plate for Standing Seam - 3m
By Cladco

Cladco 90° Verge Flashing Backer Plate for Standing Seam - 3m

£17.75 (inc VAT)
£14.79
 (ex VAT)
£17.75
Delivery: 

Current Delivery: 7 - 10 days

Key Features:
  • Length: 3m
  • Dimensions: 90mm x 60mm x 23mm 
  • External Finish: GreenCoat® Pural BT
  • Internal Finish: Light Grey Polyester
  • Material: Pre-Coated Steel
  • Gauge thickness: 0.7mm
  • Fire Rating: A1 fire rated to BS EN 13501
  • Use: Secure and close off the edges of your Stand Seam Roof
Description: 

Cladco 90° Verge Flashing Backer Plates are designed to be used with Cladco 3m Verge Flashings to secure and close off the edges of your Stand Seam Roof. Backer Plates ensure a water-tight and aesthetically appealing finish to your building.

Cladco Verge Flashing Backer Plates are installed prior to your Standing Seam Roofing Sheets and Verge Flashings. Our Backer Plates, combined with Verge Flashings, create a seal for the ends of your roof to protect and tidy up the exterior of your building.

Our Backer Plates for Verge Flashings have an internal angle of 90° and are 3 metres long. Featuring a coating of GreenCoat® Pural BT provides a weather, corrosion and scratch resistant finish, in Slate Grey.

Our Flashings and Standing Seam Sheets are made of galvanised steel that is A1 fire rated to BS EN 13501.

Verge Flashings can be bought separately or as part of our Verge Flashing and Backer Plate Kits.

Downloads & Data Sheets:

 Product Data Sheet

 Product Installation Instructions 

Read more....
A close-up view of the Cladco 90° Verge Flashing Backer Plate for Standing Seam (3m), a gray metal L-shaped pre-coated steel component used in construction for support and framing.
£17.75 (inc VAT)
£14.79
 (ex VAT)
£17.75

Related Products

Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (Flat No Ribs) Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (Flat No Ribs)
Cladco

Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (Flat No Ribs)

£33.16 (inc VAT)
£27.63
 (ex VAT)
Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (no Ribs) Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (no Ribs)
Cladco

Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet without Eaves Lip (Flat No Ribs)

£33.16 (inc VAT)
£27.63
 (ex VAT)
Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet without Eaves Lip (with Ribs) Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs)
Cladco

Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet without Eaves Lip (with Ribs)

£33.16 (inc VAT)
£27.63
 (ex VAT)
Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs) Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs)
Cladco

Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs)

£33.16 (inc VAT)
£27.63
 (ex VAT)
Cladco 35mm Ruspert® Low Profile Wood Screws + Driver Bit (Pack of 100) Cladco 35mm Ruspert® Low Profile Wood Screws + Driver Bit (Pack of 100)
Cladco

Cladco 35mm Ruspert® Low Profile Wood Screws + Driver Bit (Pack of 100)

£27.75 (inc VAT)
£23.13
 (ex VAT)
Cladco 20mm Ruspert® Low Profile Stitching Screws + Driver Bit (Pack of 100) Cladco 20mm Ruspert® Low Profile Stitching Screws + Driver Bit (Pack of 100)
Cladco

Cladco 20mm Ruspert® Low Profile Stitching Screws + Driver Bit (Pack of 100)

£24.95 (inc VAT)
£20.79
 (ex VAT)
Cladco 35mm Stainless Steel Low Profile Wood Screws + Driver Bit (Pack of 100) Cladco 35mm Stainless Steel Low Profile Wood Screws + Driver Bit (Pack of 100)
Cladco

Cladco 35mm Stainless Steel Low Profile Wood Screws + Driver Bit (Pack of 100)

£27.75 (inc VAT)
£23.13
 (ex VAT)
Cladco 20mm Stainless Steel Low Profile Stitching Screws + Driver Bit (Pack of 100) Cladco 20mm Stainless Steel Low Profile Stitching Screws + Driver Bit (Pack of 100)
Cladco

Cladco 20mm Stainless Steel Low Profile Stitching Screws + Driver Bit (Pack of 100)

£24.95 (inc VAT)
£20.79
 (ex VAT)
Cladco 38mm Annular Ring Nails For Standing Seam (Pack of 350) Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs)
Cladco

Cladco 38mm Annular Ring Nails For Standing Seam (Pack of 350)

£28.75 (inc VAT)
£23.96
 (ex VAT)
Cladco 130° Ridge Flashing for Standing Seam - 3m x 185mm x 185mm Slate Grey Cladco 130° Ridge Flashing for Standing Seam - 3m x 185mm x 185mm Nordic Night Black
Cladco

Cladco 130° Ridge Flashing for Standing Seam - 3m x 185mm x 185mm

£35.85 (inc VAT)
£29.88
 (ex VAT)
Cladco 130° Ridge Flashing and Z-Bar Kit for Standing Seam - 3m x 185mm x 185mm Slate Grey Cladco 130° Ridge Flashing and Z-Bar Kit for Standing Seam - 3m x 185mm x 185mm Nordic Night Black
Cladco

Cladco 130° Ridge Flashing and Z-Bar Kit for Standing Seam - 3m x 185mm x 185mm

£64.55 (inc VAT)
£53.79
 (ex VAT)
The Cladco 90° Corner Barge Flashing for Standing Seam (3m x 120mm x 120mm) is a pre-coated steel, matte gray flashing with a bent angular shape, used in construction to weatherproof roofs or clad structures. The Cladco 90° Corner Barge Flashing for Standing Seam (3m x 120mm x 120mm) is a pre-coated steel, dark gray metal roofing trim with a bent angular profile and matte finish, designed to direct water away from roof or cladding edges.
Cladco

Cladco 90° External Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm

£35.85 (inc VAT)
£29.88
 (ex VAT)
Three Cladco 90° Corner Barge Flashing and Z Bar Kits (3m x 120mm x 120mm) for Standing Seam projects are shown, each with angular edges to protect joints and divert water away from surfaces. Ideal for construction or cladding use. Three black Cladco 90° Corner Barge Flashing and Z Bar Kit for Standing Seam (3m x 120mm x 120mm) pieces—one wide and two narrower—are displayed side by side on a white background, featuring sharp, angular bends.
Cladco

Cladco 90° Corner Barge Flashing and Z Bar Kit for Standing Seam - 3m x 120mm x 120mm

£64.50 (inc VAT)
£53.75
 (ex VAT)
The Cladco 90° Internal Corner Barge Flashing for Standing Seam (3m x 120mm x 120mm) is a gray metal trim with a smooth, right-angle bend, perfect for finishing or protecting edges in standing seam sheeting projects. A Cladco 90° Internal Corner Barge Flashing for Standing Seam (3m x 120mm x 120mm), a long, dark grey metal strip with a folded edge, is shown on a white background.
Cladco

Cladco 90° Internal Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm

£31.10 (inc VAT)
£25.92
 (ex VAT)
Two Cladco 90° Verge Flashing and Backer Plate Kits for Standing Seam Roofs (3m, gray, metal) are shown side by side on a white background, featuring sharp edges and a smooth matte finish. The Cladco 90° Verge Flashing and Backer Plate Kit for Standing Seam - 3m features two black metal L-shaped trim pieces, shown on a white background—ideal for finishing verge details in roof construction projects.
Cladco

Cladco 90° Verge Flashing and Backer Plate Kit for Standing Seam - 3m

£39.45 (inc VAT)
£32.88
 (ex VAT)
Three Cladco 90° Internal Corner Barge Flashing and Z Bar Kits, each 3m x 120mm x 120mm, with a bent, angular design for Standing Seam Sheeting systems, displayed on a white background. Three Cladco 90° Internal Corner Barge Flashing and Z Bar Kits for Standing Seam (3m x 120mm x 120mm), black with sharp edges, are aligned parallel on a white background; one kit is wider than the others.
Cladco

Cladco 90° Internal Corner Barge Flashing and Z Bar Kit for Standing Seam - 3m x 120mm x 120mm

£59.75 (inc VAT)
£49.79
 (ex VAT)
Cladco 90° Verge Flashing for Standing Seam - 3m Slate Grey Cladco 90° Verge Flashing for Standing Seam - 3m Nordic Night Black
Cladco

Cladco 90° Verge Flashing for Standing Seam - 3m

£21.30 (inc VAT)
£17.75
 (ex VAT)
A close-up view of the Cladco 90° Verge Flashing Backer Plate for Standing Seam (3m), a gray metal L-shaped pre-coated steel component used in construction for support and framing. The Cladco 90° Verge Flashing Backer Plate for Standing Seam - 3m is a black matte pre-coated steel angle bar with sharp edges, shown on a white background—perfect for backer plates or standing seam roof verge flashings.
Cladco

Cladco 90° Verge Flashing Backer Plate for Standing Seam - 3m

£17.75 (inc VAT)
£14.79
 (ex VAT)
Cladco Standing Seam Z Bar Flashing - 3m Slate Grey Cladco Standing Seam Z Bar Flashing - 3m Nordic Night Black
Cladco

Cladco Standing Seam Z Bar Flashing - 3m

£14.29 (inc VAT)
£11.91
 (ex VAT)
A close-up of Cladco Standing Seam Z Bar Flashing (Notched) - 3m, a gray metal strip with angled notches along one edge, commonly used as a mounting bracket or in construction for standing seam roofing. Cladco Standing Seam Z Bar Flashing (Notched) - 3m: A metal angle strip with a black GreenCoat® Pural BT finish, triangular notches on one side, for use with standing seam roofing and Z Bar flashings. Shown on a white background.
Cladco

Cladco Standing Seam Z Bar Flashing (Notched) - 3m

£14.29 (inc VAT)
£11.91
 (ex VAT)
The Cladco Standing Seam J-Rail Flashing - 3m is a black, L-shaped metal angle bar with a smooth finish, ideal for use with wall cladding or other flashings to provide structural support and reinforcement in construction projects. The Cladco Standing Seam J-Rail Flashing - 3m is a long, black metal L-shaped bracket designed for wall cladding or securing Standing Seam Steel Sheets, shown on a white background.
Cladco

Cladco Standing Seam J-Rail Flashing - 3m

£20.25 (inc VAT)
£16.88
 (ex VAT)
The Cladco Standing Seam Drip Tray Flashing - 3m is a gray, pre-coated steel Z-flashing with a sharp angled profile, designed to direct water away from joints in siding or roofing for effective moisture protection. The Cladco Standing Seam Drip Tray Flashing - 3m is a dark gray pre-coated steel strip with an angled profile, a flat central section, and two perpendicular flanges, typically used as building flashing or drip tray flashing.
Cladco

Cladco Standing Seam Drip Tray Flashing - 3m

£26.29 (inc VAT)
£21.91
 (ex VAT)
Cladco Valley Edge Plate Flashing for Standing Seam - 3m Cladco Valley Edge Plate Flashing for Standing Seam - 3m
Cladco

Cladco Valley Edge Plate Flashing for Standing Seam - 3m

£20.30 (inc VAT)
£16.92
 (ex VAT)
Cladco Standing Seam Eaves Starter Flashing - 3m Nordic Night Black Cladco Standing Seam Eaves Starter Flashing - 3m Slate Grey
Cladco

Cladco Standing Seam Eaves Starter Flashing - 3m

£35.90 (inc VAT)
£29.92
 (ex VAT)
Cladco 110° Lean-To Flashing and Z Bar Kit for Standing Seam - 3m Cladco 110° Lean-To Flashing and Z Bar Kit for Standing Seam - 3m
Cladco

Cladco 110° Lean-To Flashing and Z Bar Kit for Standing Seam - 3m

£59.65 (inc VAT)
£49.71
 (ex VAT)
Cladco 110° Lean-To Bottom Plate Flashing for Standing Seam - 3m Cladco 110° Lean-To Bottom Plate Flashing for Standing Seam - 3m
Cladco

Cladco 110° Lean-To Bottom Plate Flashing for Standing Seam - 3m

£14.30 (inc VAT)
£11.92
 (ex VAT)
Cladco Lean-To Top Plate Flashing for Standing Seam - 3m Cladco Lean-To Top Plate Flashing for Standing Seam - 3m
Cladco

Cladco Lean-To Top Plate Flashing for Standing Seam - 3m

£30.98 (inc VAT)
£25.82
 (ex VAT)
Four Cladco 75° Mono Ridge Flashing and Backer Plate Kits for Standing Seam (3m, gray) are arranged diagonally on a white background, each with a unique angled profile for roof or construction use. Three pieces of Cladco 75° Mono Ridge Flashing and Backer Plate Kit for Standing Seam - 3m are arranged diagonally on a white background, highlighting their angular, folded profiles in varying lengths.
Cladco

Cladco 75° Mono Ridge Flashing and Backer Plate Kit for Standing Seam - 3m

£53.65 (inc VAT)
£44.71
 (ex VAT)
The Cladco 75° Mono Ridge Flashing for Standing Seam – 3m is a gray pre-coated steel piece with an angled profile, ideal for roofing or wall edges in standing seam roof systems, shown against a white background. A close-up of a Cladco 75° Mono Ridge Flashing for Standing Seam - 3m in dark gray shows its bent edges and smooth finish, ideal for sealing joints and preventing water ingress in standing seam roof construction.
Cladco

Cladco 75° Mono Ridge Flashing for Standing Seam - 3m

£21.45 (inc VAT)
£17.88
 (ex VAT)
Cladco 75° Mono Ridge Flashing Backer Plate for Standing Seam - 3m Slate Grey Cladco 75° Mono Ridge Flashing Backer Plate for Standing Seam - 3m Nordic Night Black
Cladco

Cladco 75° Mono Ridge Flashing Backer Plate for Standing Seam - 3m

£17.89 (inc VAT)
£14.91
 (ex VAT)
Cladco Foam Filler To Fit 30/500 Standing Seam Profile, Supaseal (25mm) Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs)
Cladco

Cladco Foam Filler To Fit 30/500 Standing Seam Profile, Supaseal (25mm)

£2.30 (inc VAT)
£1.92
 (ex VAT)
Cladco Prelaq Mica Finish 0.6mm Flat Sheet 3000mm x 1240mm Cladco Prelaq Mica Finish 0.6mm Flat Sheet 3000mm x 1240mm
Cladco

Cladco GreenCoat® Pural Finish 0.7mm Flat Sheet 750mm x 1250mm

£11.95 (inc VAT)
£9.96
 (ex VAT)
Cladco Prelaq Mica Finish 0.6mm Flat Sheet 3000mm x 1240mm Cladco Prelaq Mica Finish 0.6mm Flat Sheet 3000mm x 1240mm
Cladco

Cladco GreenCoat® Pural Finish 0.7mm Flat Sheet 3000mm x 1250mm

£70.95 (inc VAT)
£59.13
 (ex VAT)
Cladco Standing Seam Roofing Tool Kit Cladco Standing Seam Roofing Tool Kit
Cladco

Cladco Standing Seam Roofing Tool Kit

£239.00 (inc VAT)
£199.17
 (ex VAT)
Delivery: 

Current Delivery: 7 - 10 days

Key Features:
  • Length: 3m
  • Dimensions: 90mm x 60mm x 23mm 
  • External Finish: GreenCoat® Pural BT
  • Internal Finish: Light Grey Polyester
  • Material: Pre-Coated Steel
  • Gauge thickness: 0.7mm
  • Fire Rating: A1 fire rated to BS EN 13501
  • Use: Secure and close off the edges of your Stand Seam Roof
Description: 

Cladco 90° Verge Flashing Backer Plates are designed to be used with Cladco 3m Verge Flashings to secure and close off the edges of your Stand Seam Roof. Backer Plates ensure a water-tight and aesthetically appealing finish to your building.

Cladco Verge Flashing Backer Plates are installed prior to your Standing Seam Roofing Sheets and Verge Flashings. Our Backer Plates, combined with Verge Flashings, create a seal for the ends of your roof to protect and tidy up the exterior of your building.

Our Backer Plates for Verge Flashings have an internal angle of 90° and are 3 metres long. Featuring a coating of GreenCoat® Pural BT provides a weather, corrosion and scratch resistant finish, in Slate Grey.

Our Flashings and Standing Seam Sheets are made of galvanised steel that is A1 fire rated to BS EN 13501.

Verge Flashings can be bought separately or as part of our Verge Flashing and Backer Plate Kits.

Downloads & Data Sheets:

 Product Data Sheet

 Product Installation Instructions