1. Home
  3. Cladco 110° Lean-To Bottom Plate Flashing for Standing Seam - 3m
By Cladco

Cladco 110° Lean-To Bottom Plate Flashing for Standing Seam - 3m

£14.30 (inc VAT)
£11.92
 (ex VAT)
£14.30
Delivery: 

Current Delivery: 7 - 10 days

Key Features:
  • Length: 3m
  • Measurement: 150mm x 150mm with an internal angle of 110°
  • External Finish: GreenCoat® Pural BT
  • Internal Finish: Light Grey Polyester
  • Material: Pre-Coated Steel
  • Gauge thickness: 0.7mm
  • Fire Rating: A1 fire rated to BS EN 13501
  • Use: Used alongside Cladco lean-to top plates to seal your lean-to project 
Description: 

Cladco lean-to bottom plate flashings are available in 3m lengths and designed to be fixed to Z bars (notched) and adjoining walls. Bottom plate flashings are used alongside our lean-to top plates to seal your lean-to project. Manufactured from eco-friendly GreenCoat® Pural BT coated steel for weather resistance.

Cladco lean-to bottom plate flashings for standing seam projects are designed to give the perfect finish to your lean-to roof design.

Measuring 150mm x 150mm with an internal angle of 110°, bottom plate flashings sit under lean-to top plate flashings and over Z bars (notched).

Standing seam bottom plate flashings are made from SSAB Nordic quality steel using a bio-based coating made from Swedish rapeseed oil to promote sustainable steel production.

GreenCoat® Pural BT coated steel is known for its excellent durability and weather resistance with a tough, UV and corrosion-protected coat.

The standing seam system is built for a seamless finish with no visible screws required. However, if you're installing in locations exposed to strong winds or harsh conditions, you may choose to use our colour-matched 6.3×20mm fixings. These low-profile screws offer added peace of mind and come in either Ruspert®-coated or stainless steel finishes.

Downloads & Data Sheets:

 Product Data Sheet

 Product Installation Instructions 

Read more....
£14.30 (inc VAT)
£11.92
 (ex VAT)
£14.30

Related Products

Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (Flat No Ribs) Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (Flat No Ribs)
Cladco

Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (Flat No Ribs)

£33.16 (inc VAT)
£27.63
 (ex VAT)
Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (no Ribs) Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (no Ribs)
Cladco

Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet without Eaves Lip (Flat No Ribs)

£33.16 (inc VAT)
£27.63
 (ex VAT)
Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet without Eaves Lip (with Ribs) Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs)
Cladco

Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet without Eaves Lip (with Ribs)

£33.16 (inc VAT)
£27.63
 (ex VAT)
Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs) Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs)
Cladco

Cladco GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs)

£33.16 (inc VAT)
£27.63
 (ex VAT)
Cladco 35mm Ruspert® Low Profile Wood Screws + Driver Bit (Pack of 100) Cladco 35mm Ruspert® Low Profile Wood Screws + Driver Bit (Pack of 100)
Cladco

Cladco 35mm Ruspert® Low Profile Wood Screws + Driver Bit (Pack of 100)

£27.75 (inc VAT)
£23.13
 (ex VAT)
Cladco 20mm Ruspert® Low Profile Stitching Screws + Driver Bit (Pack of 100) Cladco 20mm Ruspert® Low Profile Stitching Screws + Driver Bit (Pack of 100)
Cladco

Cladco 20mm Ruspert® Low Profile Stitching Screws + Driver Bit (Pack of 100)

£24.95 (inc VAT)
£20.79
 (ex VAT)
Cladco 35mm Stainless Steel Low Profile Wood Screws + Driver Bit (Pack of 100) Cladco 35mm Stainless Steel Low Profile Wood Screws + Driver Bit (Pack of 100)
Cladco

Cladco 35mm Stainless Steel Low Profile Wood Screws + Driver Bit (Pack of 100)

£27.75 (inc VAT)
£23.13
 (ex VAT)
Cladco 20mm Stainless Steel Low Profile Stitching Screws + Driver Bit (Pack of 100) Cladco 20mm Stainless Steel Low Profile Stitching Screws + Driver Bit (Pack of 100)
Cladco

Cladco 20mm Stainless Steel Low Profile Stitching Screws + Driver Bit (Pack of 100)

£24.95 (inc VAT)
£20.79
 (ex VAT)
Cladco 38mm Annular Ring Nails For Standing Seam (Pack of 350) Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs)
Cladco

Cladco 38mm Annular Ring Nails For Standing Seam (Pack of 350)

£28.75 (inc VAT)
£23.96
 (ex VAT)
Cladco 130° Ridge Flashing for Standing Seam - 3m x 185mm x 185mm Slate Grey Cladco 130° Ridge Flashing for Standing Seam - 3m x 185mm x 185mm Nordic Night Black
Cladco

Cladco 130° Ridge Flashing for Standing Seam - 3m x 185mm x 185mm

£35.85 (inc VAT)
£29.88
 (ex VAT)
Cladco 130° Ridge Flashing and Z-Bar Kit for Standing Seam - 3m x 185mm x 185mm Slate Grey Cladco 130° Ridge Flashing and Z-Bar Kit for Standing Seam - 3m x 185mm x 185mm Nordic Night Black
Cladco

Cladco 130° Ridge Flashing and Z-Bar Kit for Standing Seam - 3m x 185mm x 185mm

£64.55 (inc VAT)
£53.79
 (ex VAT)
The Cladco 90° Corner Barge Flashing for Standing Seam (3m x 120mm x 120mm) is a pre-coated steel, matte gray flashing with a bent angular shape, used in construction to weatherproof roofs or clad structures. The Cladco 90° Corner Barge Flashing for Standing Seam (3m x 120mm x 120mm) is a pre-coated steel, dark gray metal roofing trim with a bent angular profile and matte finish, designed to direct water away from roof or cladding edges.
Cladco

Cladco 90° External Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm

£35.85 (inc VAT)
£29.88
 (ex VAT)
Three Cladco 90° Corner Barge Flashing and Z Bar Kits (3m x 120mm x 120mm) for Standing Seam projects are shown, each with angular edges to protect joints and divert water away from surfaces. Ideal for construction or cladding use. Three black Cladco 90° Corner Barge Flashing and Z Bar Kit for Standing Seam (3m x 120mm x 120mm) pieces—one wide and two narrower—are displayed side by side on a white background, featuring sharp, angular bends.
Cladco

Cladco 90° Corner Barge Flashing and Z Bar Kit for Standing Seam - 3m x 120mm x 120mm

£64.50 (inc VAT)
£53.75
 (ex VAT)
The Cladco 90° Internal Corner Barge Flashing for Standing Seam (3m x 120mm x 120mm) is a gray metal trim with a smooth, right-angle bend, perfect for finishing or protecting edges in standing seam sheeting projects. A Cladco 90° Internal Corner Barge Flashing for Standing Seam (3m x 120mm x 120mm), a long, dark grey metal strip with a folded edge, is shown on a white background.
Cladco

Cladco 90° Internal Corner Barge Flashing for Standing Seam - 3m x 120mm x 120mm

£31.10 (inc VAT)
£25.92
 (ex VAT)
Two Cladco 90° Verge Flashing and Backer Plate Kits for Standing Seam Roofs (3m, gray, metal) are shown side by side on a white background, featuring sharp edges and a smooth matte finish. The Cladco 90° Verge Flashing and Backer Plate Kit for Standing Seam - 3m features two black metal L-shaped trim pieces, shown on a white background—ideal for finishing verge details in roof construction projects.
Cladco

Cladco 90° Verge Flashing and Backer Plate Kit for Standing Seam - 3m

£39.45 (inc VAT)
£32.88
 (ex VAT)
Three Cladco 90° Internal Corner Barge Flashing and Z Bar Kits, each 3m x 120mm x 120mm, with a bent, angular design for Standing Seam Sheeting systems, displayed on a white background. Three Cladco 90° Internal Corner Barge Flashing and Z Bar Kits for Standing Seam (3m x 120mm x 120mm), black with sharp edges, are aligned parallel on a white background; one kit is wider than the others.
Cladco

Cladco 90° Internal Corner Barge Flashing and Z Bar Kit for Standing Seam - 3m x 120mm x 120mm

£59.75 (inc VAT)
£49.79
 (ex VAT)
Cladco 90° Verge Flashing for Standing Seam - 3m Slate Grey Cladco 90° Verge Flashing for Standing Seam - 3m Nordic Night Black
Cladco

Cladco 90° Verge Flashing for Standing Seam - 3m

£21.30 (inc VAT)
£17.75
 (ex VAT)
A close-up view of the Cladco 90° Verge Flashing Backer Plate for Standing Seam (3m), a gray metal L-shaped pre-coated steel component used in construction for support and framing. The Cladco 90° Verge Flashing Backer Plate for Standing Seam - 3m is a black matte pre-coated steel angle bar with sharp edges, shown on a white background—perfect for backer plates or standing seam roof verge flashings.
Cladco

Cladco 90° Verge Flashing Backer Plate for Standing Seam - 3m

£17.75 (inc VAT)
£14.79
 (ex VAT)
Cladco Standing Seam Z Bar Flashing - 3m Slate Grey Cladco Standing Seam Z Bar Flashing - 3m Nordic Night Black
Cladco

Cladco Standing Seam Z Bar Flashing - 3m

£14.29 (inc VAT)
£11.91
 (ex VAT)
A close-up of Cladco Standing Seam Z Bar Flashing (Notched) - 3m, a gray metal strip with angled notches along one edge, commonly used as a mounting bracket or in construction for standing seam roofing. Cladco Standing Seam Z Bar Flashing (Notched) - 3m: A metal angle strip with a black GreenCoat® Pural BT finish, triangular notches on one side, for use with standing seam roofing and Z Bar flashings. Shown on a white background.
Cladco

Cladco Standing Seam Z Bar Flashing (Notched) - 3m

£14.29 (inc VAT)
£11.91
 (ex VAT)
The Cladco Standing Seam J-Rail Flashing - 3m is a black, L-shaped metal angle bar with a smooth finish, ideal for use with wall cladding or other flashings to provide structural support and reinforcement in construction projects. The Cladco Standing Seam J-Rail Flashing - 3m is a long, black metal L-shaped bracket designed for wall cladding or securing Standing Seam Steel Sheets, shown on a white background.
Cladco

Cladco Standing Seam J-Rail Flashing - 3m

£20.25 (inc VAT)
£16.88
 (ex VAT)
The Cladco Standing Seam Drip Tray Flashing - 3m is a gray, pre-coated steel Z-flashing with a sharp angled profile, designed to direct water away from joints in siding or roofing for effective moisture protection. The Cladco Standing Seam Drip Tray Flashing - 3m is a dark gray pre-coated steel strip with an angled profile, a flat central section, and two perpendicular flanges, typically used as building flashing or drip tray flashing.
Cladco

Cladco Standing Seam Drip Tray Flashing - 3m

£26.29 (inc VAT)
£21.91
 (ex VAT)
Cladco Valley Edge Plate Flashing for Standing Seam - 3m Cladco Valley Edge Plate Flashing for Standing Seam - 3m
Cladco

Cladco Valley Edge Plate Flashing for Standing Seam - 3m

£20.30 (inc VAT)
£16.92
 (ex VAT)
Cladco Standing Seam Eaves Starter Flashing - 3m Nordic Night Black Cladco Standing Seam Eaves Starter Flashing - 3m Slate Grey
Cladco

Cladco Standing Seam Eaves Starter Flashing - 3m

£35.90 (inc VAT)
£29.92
 (ex VAT)
Cladco 110° Lean-To Flashing and Z Bar Kit for Standing Seam - 3m Cladco 110° Lean-To Flashing and Z Bar Kit for Standing Seam - 3m
Cladco

Cladco 110° Lean-To Flashing and Z Bar Kit for Standing Seam - 3m

£59.65 (inc VAT)
£49.71
 (ex VAT)
Cladco 110° Lean-To Bottom Plate Flashing for Standing Seam - 3m Cladco 110° Lean-To Bottom Plate Flashing for Standing Seam - 3m
Cladco

Cladco 110° Lean-To Bottom Plate Flashing for Standing Seam - 3m

£14.30 (inc VAT)
£11.92
 (ex VAT)
Cladco Lean-To Top Plate Flashing for Standing Seam - 3m Cladco Lean-To Top Plate Flashing for Standing Seam - 3m
Cladco

Cladco Lean-To Top Plate Flashing for Standing Seam - 3m

£30.98 (inc VAT)
£25.82
 (ex VAT)
Four Cladco 75° Mono Ridge Flashing and Backer Plate Kits for Standing Seam (3m, gray) are arranged diagonally on a white background, each with a unique angled profile for roof or construction use. Three pieces of Cladco 75° Mono Ridge Flashing and Backer Plate Kit for Standing Seam - 3m are arranged diagonally on a white background, highlighting their angular, folded profiles in varying lengths.
Cladco

Cladco 75° Mono Ridge Flashing and Backer Plate Kit for Standing Seam - 3m

£53.65 (inc VAT)
£44.71
 (ex VAT)
The Cladco 75° Mono Ridge Flashing for Standing Seam – 3m is a gray pre-coated steel piece with an angled profile, ideal for roofing or wall edges in standing seam roof systems, shown against a white background. A close-up of a Cladco 75° Mono Ridge Flashing for Standing Seam - 3m in dark gray shows its bent edges and smooth finish, ideal for sealing joints and preventing water ingress in standing seam roof construction.
Cladco

Cladco 75° Mono Ridge Flashing for Standing Seam - 3m

£21.45 (inc VAT)
£17.88
 (ex VAT)
Cladco 75° Mono Ridge Flashing Backer Plate for Standing Seam - 3m Slate Grey Cladco 75° Mono Ridge Flashing Backer Plate for Standing Seam - 3m Nordic Night Black
Cladco

Cladco 75° Mono Ridge Flashing Backer Plate for Standing Seam - 3m

£17.89 (inc VAT)
£14.91
 (ex VAT)
Cladco Foam Filler To Fit 30/500 Standing Seam Profile, Supaseal (25mm) Cladco 30/500 GreenCoat® 0.7 Steel Standing Seam Roof Sheet with Eaves Lip (with Ribs)
Cladco

Cladco Foam Filler To Fit 30/500 Standing Seam Profile, Supaseal (25mm)

£2.30 (inc VAT)
£1.92
 (ex VAT)
Cladco Prelaq Mica Finish 0.6mm Flat Sheet 3000mm x 1240mm Cladco Prelaq Mica Finish 0.6mm Flat Sheet 3000mm x 1240mm
Cladco

Cladco GreenCoat® Pural Finish 0.7mm Flat Sheet 750mm x 1250mm

£11.95 (inc VAT)
£9.96
 (ex VAT)
Cladco Prelaq Mica Finish 0.6mm Flat Sheet 3000mm x 1240mm Cladco Prelaq Mica Finish 0.6mm Flat Sheet 3000mm x 1240mm
Cladco

Cladco GreenCoat® Pural Finish 0.7mm Flat Sheet 3000mm x 1250mm

£70.95 (inc VAT)
£59.13
 (ex VAT)
Cladco Standing Seam Roofing Tool Kit Cladco Standing Seam Roofing Tool Kit
Cladco

Cladco Standing Seam Roofing Tool Kit

£239.00 (inc VAT)
£199.17
 (ex VAT)
Delivery: 

Current Delivery: 7 - 10 days

Key Features:
  • Length: 3m
  • Measurement: 150mm x 150mm with an internal angle of 110°
  • External Finish: GreenCoat® Pural BT
  • Internal Finish: Light Grey Polyester
  • Material: Pre-Coated Steel
  • Gauge thickness: 0.7mm
  • Fire Rating: A1 fire rated to BS EN 13501
  • Use: Used alongside Cladco lean-to top plates to seal your lean-to project 
Description: 

Cladco lean-to bottom plate flashings are available in 3m lengths and designed to be fixed to Z bars (notched) and adjoining walls. Bottom plate flashings are used alongside our lean-to top plates to seal your lean-to project. Manufactured from eco-friendly GreenCoat® Pural BT coated steel for weather resistance.

Cladco lean-to bottom plate flashings for standing seam projects are designed to give the perfect finish to your lean-to roof design.

Measuring 150mm x 150mm with an internal angle of 110°, bottom plate flashings sit under lean-to top plate flashings and over Z bars (notched).

Standing seam bottom plate flashings are made from SSAB Nordic quality steel using a bio-based coating made from Swedish rapeseed oil to promote sustainable steel production.

GreenCoat® Pural BT coated steel is known for its excellent durability and weather resistance with a tough, UV and corrosion-protected coat.

The standing seam system is built for a seamless finish with no visible screws required. However, if you're installing in locations exposed to strong winds or harsh conditions, you may choose to use our colour-matched 6.3×20mm fixings. These low-profile screws offer added peace of mind and come in either Ruspert®-coated or stainless steel finishes.

Downloads & Data Sheets:

 Product Data Sheet

 Product Installation Instructions