Rubbatrim 2 Part Gutter Trim for EPDM - 2.5m x 70mm
Couldn't load pickup availability
Delivery:
IN STOCK. Next Day Delivery (if ordered before 13:00)
Key Features:
- Length: 2500mm
- Depth: 70mm
- Fixings: Clips and Fixing Pins Included
- Colour : Black, White or Anthracite Grey
- Application: For use with EPDM to provide a neat roof edge and allow water to drain into the gutter
Description:
This gutter trim can be used on a roof edge to direct water drainage into a gutter. This trim comes with all clips, fixings and joiners included.
Used for a roof edge where water is to drain into a gutter. Fixings and joiners are all included. Available in black, white or anthracite grey. The base and top plates are identical.
Fixing:
Install a 2” x 1” timber batten to roof perimeter, level with or just below roof deck.
Install base plate approx. 5mm below the top of drip batten with the supplied stainless steel fixings. Dress membrane over base plate and secure top plate using supplied polynails.
Downloads & Data Sheets:
Installation Video:
Black
Related Products
TRC Techno EPDM Rubber Roofing Membrane (1.2mm) - Cut to Size
TRC Techno EPDM Rubber Roofing Membrane (1.52mm) - Cut to Size
TRC Techno Rubber Company EPDM Contact Bonding Adhesive
TRC Techno Rubber Company EPDM Contact Spray Adhesive 750ml
TRC Techno EPDM FormFlash Flashing Tape (per metre)
TRC Techno EPDM Cover Tape 6" (per metre)
Rubbatrim 2 Part Gutter Trim for EPDM - 2.5m x 70mm
Rubbatrim Edge Trim for EPDM - 2.5m x 106mm
TRC Plastisol Metal Wall Trim - 2500mm x 70mm
TRC Termination Bar with Fixings - 2500mm
TRC EPDM Flat Roof Rainwater Drainage Outlet
TRC Circular Corner Flashing - 216mm diameter
TRC Techno Rubber Company EPDM Contact Adhesive Canister 22kg
TRC Techno EPDM FormFlash 9" x 15.25m roll
TRC Techno EPDM FormFlash 5" x 30.5m roll
TRC Techno EPDM FormFlash 12" (per metre)
TRC Techno EPDM FormFlash 12" x 15.25m roll
TRC Techno EPDM Seam Tape 3" x 30.5m roll
TRC Techno EPDM Cover Tape 6" x 30.5m roll
TRC Techno EPDM FormFlash 18" x 15.25m roll
Delivery:
IN STOCK. Next Day Delivery (if ordered before 13:00)
Key Features:
- Length: 2500mm
- Depth: 70mm
- Fixings: Clips and Fixing Pins Included
- Colour : Black, White or Anthracite Grey
- Application: For use with EPDM to provide a neat roof edge and allow water to drain into the gutter
Description:
This gutter trim can be used on a roof edge to direct water drainage into a gutter. This trim comes with all clips, fixings and joiners included.
Used for a roof edge where water is to drain into a gutter. Fixings and joiners are all included. Available in black, white or anthracite grey. The base and top plates are identical.
Fixing:
Install a 2” x 1” timber batten to roof perimeter, level with or just below roof deck.
Install base plate approx. 5mm below the top of drip batten with the supplied stainless steel fixings. Dress membrane over base plate and secure top plate using supplied polynails.
Downloads & Data Sheets:
Installation Video:
- Choosing a selection results in a full page refresh.