Rubbatrim Edge Trim for EPDM - 2.5m x 106mm
Couldn't load pickup availability
Delivery:
IN STOCK. Next Day Delivery (if ordered before 13:00)
Key Features:
- Length: 2500mm
- Depth: 106mm
- Fixings: Predrilled & supplied with all Clips and Fixing Pins included
- Colour : Black, White or Anthracite Grey
- Application: Used to mechanically fix membranes on exposed edges. Raised profile designed to keep water on the roof
Description:
Used for a roof edge that is not attached to a wall and does not drain into a gutter. Additionally, used to mechanically fix membranes on exposed edges. Designed with its own raised upstand to direct water towards the gutter edge. Available for purchase in black, white or anthracite grey.
This RubbaTrim Edge measuring 2500mm is used on roof edges that are not attached to walls or a gutter. Specially designed with a raised upstand to direct water towards the gutter. This edge is durable and comes pre-drilled and pre-foamed for easy installation. All fixings and clips are supplied.
The trim comes complete with foam under edge, fixings and clips. The Edge Trim is 2500mm in length with a depth of 110mm. Available in Black, Anthracite and White.
Fixing:
Install a 2” x 1” timber batten to roof perimeter, level with or just below roof deck. Once membrane has been laid, apply downward pressure to compress foam prior to anchoring with stainless steel polynails.
Downloads & Data Sheets:
Black
Related Products
TRC Techno EPDM Rubber Roofing Membrane (1.2mm) - Cut to Size
TRC Techno EPDM Rubber Roofing Membrane (1.52mm) - Cut to Size
TRC Techno Rubber Company EPDM Contact Bonding Adhesive
TRC Techno Rubber Company EPDM Contact Spray Adhesive 750ml
TRC Techno EPDM FormFlash Flashing Tape (per metre)
TRC Techno EPDM Cover Tape 6" (per metre)
Rubbatrim 2 Part Gutter Trim for EPDM - 2.5m x 70mm
Rubbatrim Edge Trim for EPDM - 2.5m x 106mm
TRC Plastisol Metal Wall Trim - 2500mm x 70mm
TRC Termination Bar with Fixings - 2500mm
TRC EPDM Flat Roof Rainwater Drainage Outlet
TRC Circular Corner Flashing - 216mm diameter
TRC Techno Rubber Company EPDM Contact Adhesive Canister 22kg
TRC Techno EPDM FormFlash 9" x 15.25m roll
TRC Techno EPDM FormFlash 5" x 30.5m roll
TRC Techno EPDM FormFlash 12" (per metre)
TRC Techno EPDM FormFlash 12" x 15.25m roll
TRC Techno EPDM Seam Tape 3" x 30.5m roll
TRC Techno EPDM Cover Tape 6" x 30.5m roll
TRC Techno EPDM FormFlash 18" x 15.25m roll
Delivery:
IN STOCK. Next Day Delivery (if ordered before 13:00)
Key Features:
- Length: 2500mm
- Depth: 106mm
- Fixings: Predrilled & supplied with all Clips and Fixing Pins included
- Colour : Black, White or Anthracite Grey
- Application: Used to mechanically fix membranes on exposed edges. Raised profile designed to keep water on the roof
Description:
Used for a roof edge that is not attached to a wall and does not drain into a gutter. Additionally, used to mechanically fix membranes on exposed edges. Designed with its own raised upstand to direct water towards the gutter edge. Available for purchase in black, white or anthracite grey.
This RubbaTrim Edge measuring 2500mm is used on roof edges that are not attached to walls or a gutter. Specially designed with a raised upstand to direct water towards the gutter. This edge is durable and comes pre-drilled and pre-foamed for easy installation. All fixings and clips are supplied.
The trim comes complete with foam under edge, fixings and clips. The Edge Trim is 2500mm in length with a depth of 110mm. Available in Black, Anthracite and White.
Fixing:
Install a 2” x 1” timber batten to roof perimeter, level with or just below roof deck. Once membrane has been laid, apply downward pressure to compress foam prior to anchoring with stainless steel polynails.
Downloads & Data Sheets:
- Choosing a selection results in a full page refresh.