Cladco 130º Ridge Flashings in GreenCoat® Pural Finish - 3m x 150mm x 150mm
Couldn't load pickup availability
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3000mm
- Width: 150mm x 150mm
- Angle: 130º internal angle
- Overlap: Allow 200mm minimum
- Finish: GreenCoat® Pural Coated (please select colour)
- Material: Galvanised Steel
Description:
Cladco Roof Ridge cap pieces are used at the apex of your roofing to join the two sides together, Cladco ridge cover flashings are folded to a 130-degree angle and will flex 10 – 15 degrees either way, depending on your roof’s angle. Ridge cover flashings are an important component in any profiled clad apex roof and these GreenCoat® Pural Coated ridge cover flashings are available in Slate Grey, Tile Red, Nordic Night Black and Silver Fir Green colours to match your roofing shoots.
Cladco ridge flashings include a safety welt on the edge to increase the strength of the material and are available as a 3m length as standard. When fitting, please note you will need to allow a minimum of 200mm overlap from one ridge piece to the next. Sitting on top of the roofing sheets, the ridge flashing pieces need to be stitched to the roofing sheet below using stitching screws to ensure they are secured.
Contact us if you have any requirements for ridge flashings, we can fold most flashing shapes to a customer’s measurements to fit your roofing project.
Please note: The 150 x 150 flashings give a coverage of 142 x 142 due to the 8mm welt.
Downloads & Data Sheets:
Product Installation Instructions
Product Video:
Nordic Night Black
Related Products
Cladco 38mm Screws for Heavy Steel with Moulded Head (Pack of 100)
Cladco 25mm Screws for Light Steel with Moulded Head (Pack of 100)
Cladco TEK Sheeting Screws to Wood with 19mm Bonded Washer (pack of 100)
Cladco TEK Screws to Light Steel with 19mm Bonded Washer (Pack of 100)
Cladco TEK Screws to Heavy Steel with 19mm Bonded Washer (Pack of 100)
Cladco Sheeting Screws to Wood with BAZ Washer (Pack of 100)
Cladco 22mm Stitcher Screws with a 16mm Bonded Washer (Pack of 100)
Cladco Profiled Foam Eaves & Ridge Fillers to fit 32/1000 Sheeting - Black (Pairs)
Cladco Profiled Foam Eaves & Ridge Fillers to fit 34/1000 Sheeting - Black (Pairs)
Cladco Tileform Profiled Foam Fillers to fit 41/1000 Tileform Sheeting - Black (Pairs)
Cladco Corrugated 13/3 Profiled Foam Fillers Supaseal (25mm) - Black with 6mm base
Cladco 130º Ridge Flashings in Polyester Paint Finish - 3m x 200mm x 200mm
Cladco 130º Ridge Flashings in Polyester Paint Finish - 3m x 150mm x 150mm
Cladco 130º Nordic Ridge Flashings in Polyester Paint Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Polyester Paint Finish - 3m x 200mm x 200mm
Cladco 90º Corner Barge Flashings in Polyester Paint Finish - 3m x 150mm x 150mm
Cladco 110° Abutment Flashings in Polyester Paint Finish - 200mm x 200mm x 3m
Cladco Polyester Paint Coated 0.7mm Flat Sheet 3000mm x 1240mm
Cladco 130º Ridge Flashings in PVC Plastisol Finish - 3m x 200mm x 200mm
Cladco 130º Ridge Flashings in PVC Plastisol Finish - 3m x 150mm x 150mm
Cladco 130º Nordic Ridge Flashings in PVC Plastisol Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in PVC Plastisol Finish - 3m x 150mm x 150mm
Cladco 90º Corner Barge Flashings in PVC Plastisol Finish - 3m x 200mm x 200mm
Cladco 110° Abutment Flashings in in PVC Plastisol Finish - 200mm x 200mm x 3m
Cladco 130º Ridge Flashings in Galvanised Finish - 3m x 150mm x 150mm
Cladco 130º Ridge Flashings in Galvanised Finish - 3m x 200mm x 200mm
Cladco 130º Nordic Ridge Flashings in Galvanised Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Galvanised Finish - 3m x 200mm x 200mm
Cladco 90º Corner Barge Flashings in Galvanised Finish - 3m x 150mm x 150mm
Cladco 110° Abutment Flashings in Plain Galvanised Finish - 200mm x 200mm x 3m
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3000mm
- Width: 150mm x 150mm
- Angle: 130º internal angle
- Overlap: Allow 200mm minimum
- Finish: GreenCoat® Pural Coated (please select colour)
- Material: Galvanised Steel
Description:
Cladco Roof Ridge cap pieces are used at the apex of your roofing to join the two sides together, Cladco ridge cover flashings are folded to a 130-degree angle and will flex 10 – 15 degrees either way, depending on your roof’s angle. Ridge cover flashings are an important component in any profiled clad apex roof and these GreenCoat® Pural Coated ridge cover flashings are available in Slate Grey, Tile Red, Nordic Night Black and Silver Fir Green colours to match your roofing shoots.
Cladco ridge flashings include a safety welt on the edge to increase the strength of the material and are available as a 3m length as standard. When fitting, please note you will need to allow a minimum of 200mm overlap from one ridge piece to the next. Sitting on top of the roofing sheets, the ridge flashing pieces need to be stitched to the roofing sheet below using stitching screws to ensure they are secured.
Contact us if you have any requirements for ridge flashings, we can fold most flashing shapes to a customer’s measurements to fit your roofing project.
Please note: The 150 x 150 flashings give a coverage of 142 x 142 due to the 8mm welt.
Downloads & Data Sheets:
Product Installation Instructions
Product Video:
- Choosing a selection results in a full page refresh.