Cladco 130º Ridge Flashings in PVC Plastisol Finish - 3m x 200mm x 200mm
Couldn't load pickup availability
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3000mm
- Width: 200mm x 200mm
- Angle: 130º
- Overlap: Allow 100mm minimum
- Finish: PVC Plastisol (please select colour)
- Material: Galvanised Steel
Description:
Cladco Roof Ridge cap pieces are used at the apex of the roof to join the two sides together. They are folded to a 130-degree internal angle and will flex 10 – 15 degrees either way, dependent on the angle of your roof. Ridges are a major component in any profiled clad apex roof and as they are available in a range of colours and finishes to match our roof sheets, PVC ridge caps will enhance the aesthetics of any building.
Roof ridge caps include a safety welt on the edge to increase the strength of the material and are provided as a 3m length as standard. When fitting the PVC ridge caps, please remember to allow a minimum of 100mm overlap from one roof ridge cap piece to the next.
Roof ridge cap pieces sit on top of the roofing sheets and are stitched (using st22 stitching screws) to the sheet below to secure them in place. They are intended to be used at the apex join of two sides of your roofing. Roof ridge caps are a necessary part of any profiled clad building and, with the range and colours that are available, can enhance the aesthetics of any structure.
Our PVC ridge caps include a safety welt to increase the strength of the material. We can fold most flashing shapes to customers’ requirements in 3-metre lengths at short notice.
Please note: The 200 x 200 flashings give a coverage of 192 x 192 due to the 8mm welt.
Downloads & Data Sheets:
Product Installation Instructions
PVC Plastisol Performance Overview
Product Video:
Related Products
Cladco Sheeting Screws to Wood with 19mm Bonded Washer (pack of 100)
Cladco 65mm Sheeting Screws to wood with BAZ washer (Pack of 100)
Cladco 22mm Stitcher Screws with a 16mm Bonded Washer (Pack of 100)
Cladco HC19 19mm Colour Cap (Pack of 100)
TEK Screw Socket Driver Tool
Cladco Mastic Lapping Tape Strip Roll - 9mm x 1.5mm x 30m
Cladco Profiled Foam Eaves & Ridge Fillers to fit 32/1000 Sheeting - Black (Pairs)
Cladco Profiled Foam Eaves & Ridge Fillers to fit 34/1000 Sheeting - Black (Pairs)
Cladco Tileform Profiled Foam Fillers to fit 41/1000 Tileform Sheeting - Black (Pairs)
Cladco Corrugated 13/3 Profiled Foam Fillers Supaseal (25mm) - Black with 6mm base
Cladco Metal Z Purlins 175mm
Cladco Z Purlin Cleats 175mm
Cladco Z Purlin Sleves 175mm
Cladco 130º Ridge Flashings in Polyester Paint Finish - 3m x 200mm x 200mm
Cladco 130º Ridge Flashings in Polyester Paint Finish - 3m x 150mm x 150mm
Cladco 130º Nordic Ridge Flashings in Polyester Paint Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Polyester Paint Finish - 3m x 200mm x 200mm
Cladco 90º Corner Barge Flashings in Polyester Paint Finish - 3m x 150mm x 150mm
Cladco 110° Abutment Flashings in Polyester Paint Finish - 200mm x 200mm
Cladco Drip Tray Flashings in Polyester Paint Finish - 3m
Cladco Polyester Paint Coated 0.7mm Flat Sheet 3000mm x 1240mm
Cladco 130º Ridge Flashings in PVC Plastisol Finish - 3m x 200mm x 200mm
Cladco 130º Ridge Flashings in PVC Plastisol Finish - 3m x 150mm x 150mm
Cladco 130º Nordic Ridge Flashings in PVC Plastisol Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in PVC Plastisol Finish - 3m x 150mm x 150mm
Cladco 90º Corner Barge Flashings in PVC Plastisol Finish - 3m x 200mm x 200mm
Cladco 110° Abutment Flashings in in PVC Plastisol Finish - 200mm x 200mm
Cladco Drip Tray Flashings in PVC Plastisol Finish - 3m
Cladco PVC Plastisol 0.7mm Flat Sheet 3000mm x 1240mm
Cladco 130º Ridge Flashings in Galvanised Finish - 3m x 150mm x 150mm
Cladco 130º Ridge Flashings in Galvanised Finish - 3m x 200mm x 200mm
Cladco 130º Nordic Ridge Flashings in Galvanised Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Galvanised Finish - 3m x 200mm x 200mm
Cladco 90º Corner Barge Flashings in Galvanised Finish - 3m x 150mm x 150mm
Cladco 110° Abutment Flashings in Plain Galvanised Finish - 200mm x 200mm
Cladco Drip Tray Flashings in Plain Galvanised Finish - 3m
Cladco Plain Galvanised 0.7mm Flat Sheet 3000mm x 1240mm
Cladco 130º Ridge Flashings in Prelaq Mica Finish - 3m x 150mm x 150mm
Cladco 130º Ridge Flashings in Prelaq Mica Finish - 3m x 200mm x 200mm
Cladco 130º Nordic Ridge Flashings in Prelaq Mica Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Prelaq Mica Finish - 3m x 150mm x 150mm
Cladco 90º Corner Barge Flashings in Prelaq Mica Finish - 3m x 200mm x 200mm
Cladco 110° Abutment Flashings in Prelaq Mica Finish - 200mm x 200mm
Cladco Drip Tray Flashings in Prelaq Mica Finish - 3m
Cladco Prelaq Mica Finish 0.6mm Flat Sheet 3000mm x 1240mm
Soudal Silirub 2 Silicone Elastic Low Modulus Sealant - 300ml Clear
Cut Level 5 Protective Safety Gloves - Conforms to EN388 (4543)
Cladco Straight Cut Tin Snips
Cladco Profiled Foam Eaves Fillers to fit 32/1000 Sheeting - Black
Cladco Profiled Foam Eaves Fillers to fit 34/1000 Sheeting - Black
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3000mm
- Width: 200mm x 200mm
- Angle: 130º
- Overlap: Allow 100mm minimum
- Finish: PVC Plastisol (please select colour)
- Material: Galvanised Steel
Description:
Cladco Roof Ridge cap pieces are used at the apex of the roof to join the two sides together. They are folded to a 130-degree internal angle and will flex 10 – 15 degrees either way, dependent on the angle of your roof. Ridges are a major component in any profiled clad apex roof and as they are available in a range of colours and finishes to match our roof sheets, PVC ridge caps will enhance the aesthetics of any building.
Roof ridge caps include a safety welt on the edge to increase the strength of the material and are provided as a 3m length as standard. When fitting the PVC ridge caps, please remember to allow a minimum of 100mm overlap from one roof ridge cap piece to the next.
Roof ridge cap pieces sit on top of the roofing sheets and are stitched (using st22 stitching screws) to the sheet below to secure them in place. They are intended to be used at the apex join of two sides of your roofing. Roof ridge caps are a necessary part of any profiled clad building and, with the range and colours that are available, can enhance the aesthetics of any structure.
Our PVC ridge caps include a safety welt to increase the strength of the material. We can fold most flashing shapes to customers’ requirements in 3-metre lengths at short notice.
Please note: The 200 x 200 flashings give a coverage of 192 x 192 due to the 8mm welt.
Downloads & Data Sheets:
Product Installation Instructions
PVC Plastisol Performance Overview
Product Video:
Be the first to know about our latest offers, product deals & exclusive discounts!
- Choosing a selection results in a full page refresh.
Your cart
Subtotal