Cladco 90º Corner Barge Flashings in Prelaq Mica Finish - 3m x 200mm x 200mm
Couldn't load pickup availability
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3000mm
- Width: 200mm x 200mm
- Angle: 90º internal angle
- Overlap: Allow 200mm minimum
- Finish: Prelaq Mica Finish (please select colour)
- Material: Galvanised Steel
Description:
Sometimes referred to as verges, roof edge barge flashings can be used at the end of a run of sheets and will seal off the edge. A vital part of any profiled clad roof, metal roof barge flashing helps to weatherproof a building and add an aesthetically pleasing element to your finished roof project.
These metal roof barge flashings are available in 150mm x 150mm and 200mm x 200mm, made from prelaq Mica and will match or contrast the look of your roof, depending on the look you’re after, available in graphite grey or copper brown. You can secure them to your roofing using stitching screws and will need to allow for an overlap of a minimum of 200mm when fitting end on end.
Each 90 degree Corner Flashing can be used at the end of a run of sheets to trim and seal off the edge of a roof. Steel Flashings are a vital part of any roofing or cladding project, helping to improve weatherproofing and aesthetics. Available in a range of colours to match or contrast Tile Form Roofing Sheets. Flashings are installed using 22mm Stitching Screws to the roofing sheets below. Allow a minimum 200mm overlap when fitting Corner Barge Flashings.
These 200mm x 200mm Barge Flashings give a coverage of 190mm x 190mm due to the 10mm safety welt.
Downloads & Data Sheets:
Product Installation Instructions Product Video:
Black
Related Products
Cladco TEK Sheeting Screws to Wood with 19mm Bonded Washer (pack of 100)
Cladco TEK Sheeting Screws to Light Steel with 19mm Bonded Washer (Pack of 100)
Cladco TEK Sheeting Screws to Heavy Steel with 19mm Bonded Washer (Pack of 100)
Cladco Sheeting Screws to Wood with BAZ Washer (Pack of 100)
Cladco 22mm Stitcher Screws with a 16mm Bonded Washer (Pack of 100)
Cladco Profiled Foam Eaves & Ridge Fillers to fit 32/1000 Sheeting - Black (Pairs)
Cladco Profiled Foam Eaves & Ridge Fillers to fit 34/1000 Sheeting - Black (Pairs)
Cladco Tileform Profiled Foam Fillers to fit 41/1000 Tileform Sheeting - Black (Pairs)
Cladco Corrugated 13/3 Profiled Foam Fillers Supaseal (25mm) - Black with 6mm base
Cladco 130º Ridge Flashings in Polyester Paint Finish - 3m x 200mm x 200mm
Cladco 130º Ridge Flashings in Polyester Paint Finish - 3m x 150mm x 150mm
Cladco 130º Nordic Ridge Flashings in Polyester Paint Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Polyester Paint Finish - 3m x 200mm x 200mm
Cladco 90º Corner Barge Flashings in Polyester Paint Finish - 3m x 150mm x 150mm
Cladco 110° Abutment Flashings in Polyester Paint Finish - 200mm x 200mm
Cladco Polyester Paint Coated 0.7mm Flat Sheet 3000mm x 1240mm
Cladco 130º Ridge Flashings in PVC Plastisol Finish - 3m x 200mm x 200mm
Cladco 130º Ridge Flashings in PVC Plastisol Finish - 3m x 150mm x 150mm
Cladco 130º Nordic Ridge Flashings in PVC Plastisol Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in PVC Plastisol Finish - 3m x 150mm x 150mm
Cladco 90º Corner Barge Flashings in PVC Plastisol Finish - 3m x 200mm x 200mm
Cladco 110° Abutment Flashings in in PVC Plastisol Finish - 200mm x 200mm
Cladco 130º Ridge Flashings in Galvanised Finish - 3m x 150mm x 150mm
Cladco 130º Ridge Flashings in Galvanised Finish - 3m x 200mm x 200mm
Cladco 130º Nordic Ridge Flashings in Galvanised Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Galvanised Finish - 3m x 200mm x 200mm
Cladco 90º Corner Barge Flashings in Galvanised Finish - 3m x 150mm x 150mm
Cladco 110° Abutment Flashings in Plain Galvanised Finish - 200mm x 200mm
Cladco 130º Ridge Flashings in Prelaq Mica Finish - 3m x 150mm x 150mm
Cladco 130º Ridge Flashings in Prelaq Mica Finish - 3m x 200mm x 200mm
Cladco 130º Nordic Ridge Flashings in Prelaq Mica Finish - 3m x 195mm x 195mm
Cladco 90º Corner Barge Flashings in Prelaq Mica Finish - 3m x 150mm x 150mm
Cladco 90º Corner Barge Flashings in Prelaq Mica Finish - 3m x 200mm x 200mm
Cladco 110° Abutment Flashings in Prelaq Mica Finish - 200mm x 200mm
Soudal Silirub 2 Silicone Elastic Low Modulus Sealant - 300ml Clear
Cut Level 5 Protective Safety Gloves - Conforms to EN388 (4543)
Delivery:
Current Delivery: 7 - 10 days
Key Features:
- Length: 3000mm
- Width: 200mm x 200mm
- Angle: 90º internal angle
- Overlap: Allow 200mm minimum
- Finish: Prelaq Mica Finish (please select colour)
- Material: Galvanised Steel
Description:
Sometimes referred to as verges, roof edge barge flashings can be used at the end of a run of sheets and will seal off the edge. A vital part of any profiled clad roof, metal roof barge flashing helps to weatherproof a building and add an aesthetically pleasing element to your finished roof project.
These metal roof barge flashings are available in 150mm x 150mm and 200mm x 200mm, made from prelaq Mica and will match or contrast the look of your roof, depending on the look you’re after, available in graphite grey or copper brown. You can secure them to your roofing using stitching screws and will need to allow for an overlap of a minimum of 200mm when fitting end on end.
Each 90 degree Corner Flashing can be used at the end of a run of sheets to trim and seal off the edge of a roof. Steel Flashings are a vital part of any roofing or cladding project, helping to improve weatherproofing and aesthetics. Available in a range of colours to match or contrast Tile Form Roofing Sheets. Flashings are installed using 22mm Stitching Screws to the roofing sheets below. Allow a minimum 200mm overlap when fitting Corner Barge Flashings.
These 200mm x 200mm Barge Flashings give a coverage of 190mm x 190mm due to the 10mm safety welt.
Downloads & Data Sheets:
Product Installation Instructions Product Video:
- Choosing a selection results in a full page refresh.