Restec FlexiTec 2020 SP Primer
Couldn't load pickup availability
IN STOCK. Next Day Delivery & Collection Available
Key Features:
- Size: 1 Litre
- Colour: Clear
- Coverage: 12-15 m2
- Application: Used to Prime Single-Ply roof surfaces such as EPDM, TPO and PVC. To be used prior to application of the Resin.
Description:
Flexitec 2020 SP Primer is used to Prime Single-Ply roof surfaces such as EPDM, TPO and PVC. To be used prior to application of the Resin.
A single component Primer to be used when the installation is to take place over an existing EPDM or TPO membrane.
Moisture curing within 2 to 4 hour
Mixing: Mix the primer thoroughly by stirring or shaking before application.
Application: Brush-apply a thin coat of primer to the substrate. Avoid excess build-up of material in
all areas, and especially in corners. If necessary, use the brush to spread the material evenly and
avoid greater layer thicknesses.
Downloads & Data Sheets:
FlexiTec 2020 Application Guide
Application Video:
Related Products
Restec FlexiTec 225g Chopped Strand Mat Fibreglass - Per Meter
Restec FlexiTec 225g Chopped Strand Mat Fibreglass - 20m2 roll
Restec FlexiTec 225g Chopped Strand Mat Fibreglass - 30m2 roll
Restec FlexiTec 225g Chopped Strand Mat Fibreglass - 60m2 roll
Restec FlexiTec 225g Chopped Strand Mat Fibreglass - 120m2 Full Roll
Restec FlexiTec Balcony / Walkway Sealer Coat - Dark Grey 10kg
Restec FlexiTec Balcony / Walkway Sealer Coat - Clear 10kg
GRP Flat Roof Breather Vent for Fibreglass Roofing Systems - 75mm
GRP Fibreglass Horizontal Through Wall / Parapet Outlet - 520mm
Universal Flexible Leaf Guard for Internal Drain Outlets (60mm – 140mm)
Restec FlexiTec 2020 Resin - Dark Grey 20kg (PALLET of 10)
Restec FlexiTec 2020 Resin - Dark Grey 20kg (PALLET of 20)
Restec FlexiTec 2020 Resin - Dark Grey 20kg (PALLET of 30)
IN STOCK. Next Day Delivery & Collection Available
Key Features:
- Size: 1 Litre
- Colour: Clear
- Coverage: 12-15 m2
- Application: Used to Prime Single-Ply roof surfaces such as EPDM, TPO and PVC. To be used prior to application of the Resin.
Description:
Flexitec 2020 SP Primer is used to Prime Single-Ply roof surfaces such as EPDM, TPO and PVC. To be used prior to application of the Resin.
A single component Primer to be used when the installation is to take place over an existing EPDM or TPO membrane.
Moisture curing within 2 to 4 hour
Mixing: Mix the primer thoroughly by stirring or shaking before application.
Application: Brush-apply a thin coat of primer to the substrate. Avoid excess build-up of material in
all areas, and especially in corners. If necessary, use the brush to spread the material evenly and
avoid greater layer thicknesses.
Downloads & Data Sheets:
FlexiTec 2020 Application Guide
Application Video:
- Choosing a selection results in a full page refresh.