ClassicBond® Russ Tape - Mechanical Bonding
Couldn't load pickup availability
Delivery:
Current Delivery: 1 - 2 days
Description:
Sold per linear metre - Please enter quantity required in linear meters (for example, to order a 4 meter length enter 4 in the quantity field).
In common with most single ply material, EPDM will overtime try and shrink. The base tie in mechanically fixes the membrane to the roof deck where the membrane turns UP through an angle change. e.g. Wall upstand. Any further movement is accommodated by the EPDM’s ability to elongate by over 300%
RUSS (Reinforced Universal Secure Strip) has bonding tape pre-applied along one edge, this is bonded to the underside of the EPDM using ClassicBond Rubber Primer, meaning that the EPDM membrane does not require puncturing during installation.
2" Seam Fastening Plates are included with the Russ tape. We supply sufficient seam fasteners to secure the tape to the deck at 300mm intervals i.e. 3-4 per metre.
Downloads & Data Sheets:
Related Products
ClassicBond® Rubber Roof EPDM (1.2mm thick) - CUT TO SIZE
ClassicBond® Rubber Roof EPDM (1.5mm thick) - CUT TO SIZE
ClassicBond® EPDM Flat Roof Extension Kit - (CUT TO SIZE)
ClassicBond® EPDM Garage Rubber Roof Kit - (CUT TO SIZE)
ClassicBond® EPDM Dormer Rubber Roof Kit - (CUT TO SIZE)
Plastisol Metal Wall Trim for ClassicBond® Rubber Roofing - 3 mtr
Plastisol Metal Edge Trim for ClassicBond® Rubber Roofing - 3 mtr
ClassicBond® External Corner Patch Un-cured Tape - 225mm x 300mm
ClassicBond® Internal Corner Patch Uncured Tape - 150mm x 225mm
ClassicBond® Horizontal Rain Outlet 100mm Complete Installation Kit
ClassicBond® SPB Spray Gun for Contact Bonding Adhesive (including spray tip)
EPDM Aluminium Termination Bar for ClassicBond® - 2mtr
Delivery:
Current Delivery: 1 - 2 days
Description:
Sold per linear metre - Please enter quantity required in linear meters (for example, to order a 4 meter length enter 4 in the quantity field).
In common with most single ply material, EPDM will overtime try and shrink. The base tie in mechanically fixes the membrane to the roof deck where the membrane turns UP through an angle change. e.g. Wall upstand. Any further movement is accommodated by the EPDM’s ability to elongate by over 300%
RUSS (Reinforced Universal Secure Strip) has bonding tape pre-applied along one edge, this is bonded to the underside of the EPDM using ClassicBond Rubber Primer, meaning that the EPDM membrane does not require puncturing during installation.
2" Seam Fastening Plates are included with the Russ tape. We supply sufficient seam fasteners to secure the tape to the deck at 300mm intervals i.e. 3-4 per metre.
Downloads & Data Sheets:
- Choosing a selection results in a full page refresh.